USG ME Building Materials; Ceiling, gypsum boards metal framing

Metal Framing

Back To Top Back To Top

Control Joint - CJ75T

USG Control Joints, used for expansion in both drywalls and ceilings, USG Boral control joint has been designed for movement of up to 6mm in each direction, 0.3 mm thick with Zinc coating 180-270 g/m².
Thickness
0.3
Zinc Coating
180


Features
  • Large wafer head
  • Philips head recess
  • Special drill point
  • Anti corrosion treatment by zinc coating
  • Available in 10h, 48h and 100h salt spray test
Specifications
Physical Properties
  • Galvanized steel G90, Aluminum Alloy 6063
  • Standard - 2 Patterns
  • Sizes: Length: 3000 mm, Dimensions: 11.5x48 mm, Thickness: 0.45mm for steel and 0.75mm for Aluminum
  • ASTM & Code Standards: Metal Control Joint are produced to meet or exceed ASTM C645 and C955
  • Galvanized sheet steel meets or exceeds requirements of ASTM A-653
  • For installation & storage information refer to ASTM C1007 & C754
  • Green Benefits and Recycled Content: LEED Credit MR 2 – USG Boral products are manufactured from cold formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream
  • LEED Credit MR 4 – USG Boral steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer.
Catalogue

Item

Thickness

Zinc Coating

CJ75T
0.3
180

Featured Products

Items in Bucket

GO TO BUCKET
;
My Submittals
Caution

Caution

OK
Caution

Caution

Yes No

My Submittals

Close
You don't have any submittals added