General Purpose Basecoat is composed of Portland cement and dry latex polymers specially designed for exteriors walls, ceilings system (EIFS, Exterior insulation and finishing system). It is prepared on site with water and applied with exterior tape brand reinforcement at joints between boards, inside and outside corners. Meets or exceeds the following standards ASTM C472-79, C266-86, C109-84, EN 99E-1.
Application: The surface where you will apply the cement must be completely clean, dry and free of dust, ice, grease, oil or other substances that may prevent adhesion. Fill joints with General Purpose Basecoat with a Hammer- End Joint Knife and then place the reinforcing exterior tape, retroweling removing excess of Basecoat in order to embed the tape. Cover corners and vinyl beads. The thickness of the General Purpose Basecoat must be thin, no more than 1 mm. Remove excess with a flat metal wool or polystyrene wet. Allow dry at least 4 hours. Once the joints are dry, apply a uniform layer of 2 mm. (1/16 “) thick over the entire surface of Basecoat with a flat trowel. Allow dry at least 24 hours before applying any seal or finish
Mixing
Mixing: Place 5 liters of water in a container. Start the mixer; slowly add USG Boral General Purpose Basecoat and mix until to obtain a homogeneous mixture. Add more water if is necessary. Approximate water-cement ratios for Basecoat (hand or machine application) are 6 liters per bag. Mix plaster with a cage-type paddle driven by a heavy-duty drill capable of producing 300 to 450 rpm. When the mixture is smooth and free of lumps, let stand 15 minutes, and then re-mix to a smooth paste
Storage
Storage: Store material in a cool, dry place. Avoid direct sunlight. Maintain temperature above 4 °C (40 °F)
Shelf Life: Up to 12 months under protected storage conditions
We use tools, such as cookies, to enable essential services and functionality and collect data on how visitors interact with our site.
By clicking Accept, you agree to our use of these tools for advertising, analytics and support.
Click Cookies Disclaimer to learn more including how to disable Cookies.
Cookies Disclaimer
Back To Top
