Imperial veneer finish is a high-strength veneer plaster designed for single-coat application over Imperial gypsum base, or as a high-strength finish over veneer or conventional high-strength sanded basecoats. Applied in 1/16 to 3/32 thicknesses, it is formulated for hand application. It produces a hard, 3,000 lb./in.2 compressive strength, abrasion-resistant finished surface.
Durable and stable. Imperial® brand veneer finish offers the durability needed in high-traffic areas
Economical construction. Substantial savings in finishing materials and application time
Fast finishing. Imperial veneer finish is usually ready for next-day decoration with a latex-based breather-type paint
Provides non combustibility. When used with Imperial® brand gypsum base, Imperial plaster systems provide fire-resistant construction.
Specifications
Product Data
Product Data: Coverage: Imperial veneer finish covers approximately 3,500-4,000 sq. ft. per ton (360-410 m2 per metric ton) of plaster. Compliance with Standards: Imperial veneer finish meets ASTM Designation C587
Warning: Store all Imperial gypsum base, Fiberock abuse-resistant panels and Durock cement board flat. Panels are heavy and can fall over, causing serious injury or death. Do not move unless authorized
Storage: Store material in a cool, dry place. Avoid direct sunlight. Maintain temperature above 40 °F (4 °C)
Shelf Life: Up to 6 months under protected storage conditions. Rotate stock. Availability and Cost: Imperial veneer finish is distributed throughout the United States. Contact a United States Gypsum Company sales office or sales person for additional information
Packaging: Imperial veneer finish is available in 50 lb. (22.7 kg) bags
Limitations
Limitations: 1. Imperial veneer finish is not recommended for use directly over Portland cement basecoat, concrete block, interior monolithic concrete, Fiberock abuse-resistant panels or Durock cement board. Use Diamond veneer basecoat directly over concrete block, Fiberock abuse-resistant panels, Durock cement board, or over Plaster-bonder on monolithic concrete before application of the finish. 2. Plaster application on masonry or concrete walls or ceilings coated with bituminous compounds or other water-proofing agents is not recommended. Exterior walls should be furred. 3. Not recommended where contact with water or excessive moisture may be encountered.
We use tools, such as cookies, to enable essential services and functionality and collect data on how visitors interact with our site.
By clicking Accept, you agree to our use of these tools for advertising, analytics and support.
Click Cookies Disclaimer to learn more including how to disable Cookies.
Cookies Disclaimer
Back To Top
